Skip to main content

This website uses technologies with which we collect information on your user behaviour (tracking and targeting). This is how we recognise you again the next time you visit the website. We use the information collected to make your visit to the website more pleasurable and personalised. Personalisation means that you will receive suitable product suggestions on this website, and on other sites, by way of advertising. We use the tracking data at the same time to continuously improve the quality of our advertising activities. For more detailed information in this respect, and on the technologies used, please consult our data protection declaration.

You can, of course, also use the website without consent being required for tracking and targeting. If you do not agree, the website does not collect any data on your personal user behaviour. Only one cookie will be stored in your browser, which will henceforth remind us that you do not want your user behaviour to be logged. Please confirm if you give your consent.

TECHNISWITCH 5/8 G2

3234/3259 - TECHNISWITCH 5/8 G2 (base unit with power supply) - blue/yellow
TECHNISWITCH  5/8 G2 (base unit with power supply)
TECHNISWITCH  5/8 G2 (base unit with power supply)
The TechniSat TechniSwitch 5/8G is a brand-new product in the IF Distribution assortment.
It has four Satellite IF-Inputs for analogue and/or digital polarities and a terrestrial input for the complete frequency range of 47 to 862 MHz.

The terrestrial input is supported by slope amplifiers that minimize the loss of these frequencies to maximum -4 dB at 47 MHz up to -1 dB at 862 MHz. The satellite range is also supported with internal amplifiers that even give a gain of +3 dB to the high frequencies up to 2150 MHz. Thus, the slope of the coaxial cables is automatically compensated for.

With its very small dimensions, which are 170 mm x 125 mm x 35 mm (WxHxD), this device is easy on installation anywhere within a building. The TechniSwitch 5/8 G even can be operated without additional power supply, or connection to 220/230 V AC.
Thus, even if there is no electric power socket at the location of the multiswitch, the system works as soon there is a receiver connected and switched on. Only one receiver on operation is enough to supply the DC voltage to the switch and the LNBF, including the internal RF and IF amplifiers. If there is a demand of continued operation of the RF amplification, independently from any receivers, (maybe a CATV signal should be available when all connected receivers are switched off), an external power supply is available.

Technical Data

Article information

4019588432598
blue/yellow
3234/3259
600 g
300 g
17.50 x 13.40 x 10.50 cm
17.20 x 11.20 x 3.30 cm

Ambient operating conditions

-25 ... 55 °C

Amplification

-2 ... 3 dB
-4 ... -1 dB

Decoupling

> 35 dB

General characteristics

Power supply

extern DC 15V/1,2A
100 ... 240 V
50 ... 60 Hz

Reception range

950 ... 2150 MHz
47 ... 862 MHz

Technical data

4
1
8
max. 100 m

Scope of Delivery

TechniSwitch 5/8 G2, Power supply, manual

Downloads