Skip to main content

This website uses technologies with which we collect information on your user behaviour (tracking and targeting). This is how we recognise you again the next time you visit the website. We use the information collected to make your visit to the website more pleasurable and personalised. Personalisation means that you will receive suitable product suggestions on this website, and on other sites, by way of advertising. We use the tracking data at the same time to continuously improve the quality of our advertising activities. For more detailed information in this respect, and on the technologies used, please consult our data protection declaration.

You can, of course, also use the website without consent being required for tracking and targeting. If you do not agree, the website does not collect any data on your personal user behaviour. Only one cookie will be stored in your browser, which will henceforth remind us that you do not want your user behaviour to be logged. Please confirm if you give your consent.


0000/3298 - TECHNIROUTER SCR-Tester - silver/yellow
The TechniRouter SCR is the ideal device for testing and monitoring EN 50494 protocols in existing TechniRouter cable structures. It can be interconnected into the existing cable network instead of a satellite through socket, allowing you to check the data transfer between the receivers and TechniRouters. This unique tester can, of course, also be installed between a receiver and socket in order to check that the receiver is functioning correctly when transmitting EN protocols or to check the standard measurements such as 18 or 13V, 22kHz, or DISEqC 1.0. Displaying the appropriate user band allows you to monitor how many and which subscribers are being operated in a connected system. You can check whether subscribers are currently in installation mode (SCR setup), whether channels are being changed (zapping), whether subscribers are offline or online, and whether the PIN code function is active in this cable system. The TechniRouter SCR Tester is currently the only checking device and tester for the EN 50494 protocol range.

Technical Data

Article information

60 g
6.20 x 5.50 x 2.20 cm

13 V display

11.5 ... 15 V

18 V display

15.5 ... 20 V

22 kHz display

18 ... 26 kHz
650 mVSS (± 250)

Recognition of SatCR and DiSEqC commands

18 ... 26 kHz
650 mVSS (± 250)

Technical data

max. 25 mA
DIN EN 50494 (auch bezeichnet als SatCR, SCR, UnicableTM, OLTTM. CSS, SCD), DiSEqC 1.2

Scope of Delivery

TechniRouter SCR tester in a high-quality storage boxes, Manual