Skip to main content

TECHNIMASK FFP2 2.1

TECHNIMASK FFP2 2.1, 180 pieces (180 VPE á 1 piece package)
TECHNIMASK FFP2 2.1, 180 pieces (180 VPE á 1 piece package)

Made in Germany


TECHNIMASK FFP2 2.1 are manufactured by TechniSat Vogtland GmbH in Schöneck / Saxony and TechniSat Teledigital GmbH in Stassfurt near Magdeburg in accordance with high quality standards. The mask consists of five layers of material. Two layers of special meltblown filter fleece filter out pollutants and particles from the air. Meltblown nonwoven fabric is also produced in Germany, more specifically at TechniForm GmbH in Nerdlen near Daun / Eifel.

Designed for longer use in everyday work


TECHNIMASK FFP2 2.1 has been specially developed for people who, for professional reasons, have to wear a mask for a long time. For this purpose, the mask offers a very low breathing resistance and excellent wearing comfort thanks to the comfortable ear straps. Adaptation to a longer period of use is confirmed by a passed dolomite dust test.

CE certified by TÜV NORD and "D" marked for successful dolomite dust test


The dolomite dust test is a voluntary test which is especially important for the use of the mask in occupational safety. TECHNIMASK FFP2 2.1 has passed this hardness test. Which confirms that it has a very high ability to absorb particles from the air, as well as a very reliable filter operation. At the same time, the mask is characterized by very low breathing resistance and a longer shelf life.
In the dolomite dust test, the mask exposure to dolomite dust is gradually increased, which affects breathing, thus the resistance is checked. The general rule is: the more dust, the higher the breathing resistance - breathing becomes more difficult. However, with the TECHNIMASK FFP2 2.1, this increase in breathing resistance is lower compared to the standard FFP2 mask - breathing remains pleasantly easy for longer periods. Therefore, TECHNIMASK FFP2 2.1 can also carry the "D" mark, ie the "FFP2 D" mark, in addition to the CE mark granted by TÜV NORD.
TECHNIMASK FFP2 2.1 is therefore a mask that cares about work safety and protection against infections. It is used not only in the private and medical sectors, but also in industry and trade, as well as in emergency services and fire brigades. This mask is therefore ideal for people who have to wear it for a long time for professional reasons.

Dermatologically tested


The soft fleece material does not irritate the skin and has been dermatologically tested for skin intolerance. The TECHNIMASK FFP2 2.1 is therefore ideal for allergy sufferers. The FFP2 mask has also passed the in-vitro cytotoxicity test according to EN ISO 10993-5:2009, which does not show any damage to tissue or cells in the face, even when worn for a long time.

High wearing comfort


The nose clip is integrated directly and securely into the face mask and, in combination with the optimized ear loops, ensures a comfortable fit.

Technical Data

Article information

4019588138629
18260612
Weiß
1001/2862
13.00 x 24.00 x 2.20 cm
39.40 x 39.40 x 36.00 cm

Mask properties

Elastic strap
plastic-coated wire (two core)
5 layers of non-woven material with 2 layers of meltblown fabric
Valveless
FFP2 NR D
EN 149:2001+A1:2009
- Not reusable, for single use only
- No protection against carcinogenic and radioactive substances, airborne biological agents of risk group 3 + enzymes