Skip to main content


MULTYTENNE DUOSAT, two participants
MULTYTENNE DUOSAT, two participants
This compact, high-quality dish with a diameter of only 45 cm allows you to receive signals from the two satellite positions

Eutelsat 13° East,
Astra 19.2° East

in parallel and without any need for a rotating motor.

To receive the four orbital positions in parallel, all you need to do is to align the Multytenne correctly for the Astra 19,2° East position.

The Multytenne reception unit provides exceptional performance, and a patent on its construction is pending. It incorporates four excellent electronic reception units, which are controlled via a DiSEqC Switch. This means that all that is required for connection to the digital satellite receiver is a single, normal co-axial cable.

The system provides outstanding reception characteristics. Nevertheless, it must be pointed out that the final determinant of signal quality is the transmission performance of the respective transponder on the satellite being used.

Technical Data

Article information

5,17 kg
4,07 kg
45 x 48 cm
50,5 x 50 x 24,3 cm

Local oscillator

9,75 GHz ± 3MHz
10,6 GHz ± 3MHz

LNB control

11 ... 14 V
16 ... 20 V
22 kHz

Ambient operating conditions

5 ... 100 %
-40 ... 65 °C

General characteristics

1 mm
Powder-coated on both sites

Input frequency range

10,7 - 11,7 GHz
11,7 - 12,75 GHz

Noise factor

0,7 dB max.
0,8 dB max.

Output frequency range

950 - 1.950 MHz
1.100 - 2.150 MHz

Power supply

11 ... 20 V
170 mA (Typ.)

Technical data

30 °
32,2 dBi @11,3 GHz
Eutelsat 13° East, Astra 19,2° East
All technical data

Scope of Delivery

Satellite dish antenna SATMAN 45,Multytenne DuoSatreception unit (LNBs), wall mount, installation instructions